• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a Saab 9-3 Key

The Saab 9-3 is a great car that has a lot of appeal for drivers. It offers good visibility and an efficient engine. It has a high safety rating.

It is important that you have two keys that work for your vehicle. If you lose one key, it can be expensive to replace it with another one.

How to Replace the Ignition Key on the Saab 9-3

If the car key won't engage in the ignition, you need to replace it. This guide will walk you through how to do it on a Saab 9-3. You'll need to replace the key, purchase another reprogrammable device, and purchase a new case for your key-fob.

As opposed to earlier models, modern Saab cars use an electronic transponder inside the key-fob instead of a physical key to unlock and start the car. The reprogrammable batteries inside the key-fob inevitably get worn out, and eventually will not be able to hold charge. This is particularly true if you use the same key for the lock you have.

The good news is that the battery is easily replaced by a professional locksmith. You can also do it yourself if you have the proper tools and a bit of patience. The first step is to disassemble the key-fob apart. This is accomplished by inserting a flathead screwdriver into the slot that is located in the middle of the case. It is important to work slowly, since the plastic is thin and is susceptible to damage.

Once the case has been opened, you can make the new key by combining lower part of the key from earlier with the transponder and banana. This will ensure that the new key is properly mated to your CIM, which can make a huge difference when replacing the sole keys for your saab key replacement bristol 9-3.

How do you replace the ignition Key in a Saab 900

If you do not have two keys, you'll need to remove the steering wheel and dashboard to gain access to the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, you can remove the trim and dashboard pieces around the steering wheel. Once the dashboard is removed, you can put an opening with a screwdriver behind the ignition switch.

The ignition cylinder comes with a key lock, which can prevent the vehicle from starting if it doesn't have the key in it. If the ignition switch on your 900 doesn't work properly, you should check if the key is in the lock or stuck in the barrel of ignition. It's also a good idea to rotate your keys on a regular basis and keep them clean so that one doesn't get bent.

Saab cars differ from other cars due to the fact that they don't use traditional keys made of metal. Instead, the car detects electronic signals coming from the key fob through a special microchip in it.

If you lose only one working key fob, the dealer will charge the highest dollar for the replacement of the computer module (known as the CIM). We can however reprogram your computer's EEPROM, and then prepare it to accept new keys without replacing it. This will save you up to 50% of the cost the dealer charges! This is the saab key programmer KEY PROGRAM. Find out more about it here!

How do you replace the ignition Key in the Saab9-5

The metal component of a traditional Saab key is simple to copy, and it's not a major obstacle against theft of a vehicle. The electronic portion of the key fob has an embedded chip that can identify the car when the key is put in the ignition switch.

Saab's anti-theft device has been relying on this technology for more than 10 years. It's not as good as a physical lock on the door however it makes stealing your own car significantly more difficult. This is the reason why every saab 93 key fob owner should always keep a spare key on hand.

The majority of new Saabs come with two keys at the factory, however you can add more at an agent using a handheld computer called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 vehicles, which come with more modern and advanced features that require a separate key-fob, and utilize a different process.

The dealer will replace the CIM or TWICE module on those vehicles if all keys are lost. They'll cost you top dollar for doing it. We can however reprogram the EEPROM in your existing computer and set it up to accept new keys, and not replace the expensive modules.

How to replace the ignition Key on the Saab XC90

If your SAAB 9-3 key fob is having problems turning the barrel of the lock, it may be time to replace it. Fortunately, the process is quite simple and doesn't require you to visit a dealer. You can complete the process at home, using a couple of simple tools.

You'll first need to prepare the new keys. Before starting, make sure that the anti-theft feature is disabled by placing blocks on the rear wheels, and then adjusting the handbrake. Place the key in the ignition and turn the key to the "on" position. This will activate the accessories but not start the engine. Repeat this five times, and then leave the key in the on position.

The next step is to buy a new case for your key fob. You can get these at any auto parts store and they're typically very affordable. You can get them without electronics, based on the model.

To open the case, gently push the screwdriver with a flathead into the slot in the middle. When you've split the case, you will have access to all of the internal electronic components. Use a flathead screwdriver to gently pry out the electronics.