• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Fitting

Protect your vehicle from theft of keys, cloning and hacking with the world's first aftermarket immobiliser for CAN. With the option to link to an Ghost app and GPS tracking system that can send you call alerts when your car is altered with or stolen.

The installation of the Ghost immobiliser is done by a trained technician. It is essential to have the right equipment and heat shrink tubing.

Getting Started

Ghost immobilisers are an excellent alternative to physical theft protection devices such as car alarms and wheel locks. They protect your vehicle without using LED indicators or key fobs. Instead, they connect directly to the ECU's CAN data network. They can only be activated after entering a PIN sequence. This provides a more secure level of protection from key hacking, cloning and even ECU swapping.

In the end, installing a ghost immobiliser Birmingham must be completed with great agility and accuracy. It's like navigating a minefield; one misstep could cause severe damage to the circuits of the electrical system of your vehicle. To avoid this, it's crucial that you know the procedure for installing and prepare your vehicle for the installation process.

The first step is to prepare the vehicle by taking out interior panels to make space for the immobiliser unit. Once you have found the perfect place to hide it and you have it, use cable ties to secure it. Then, tidy up the wiring by tying loose wires and utilizing insulation tape or heat shrink tubing to cover the exposed connections. This will help to reduce the chance of short circuits that are not intended to be there as well as improving the aesthetics and decreasing the chance of tampering from thieves.

Finally, identify the source of constant 12V power as well as a grounding location for the ghost immobiliser car immobiliser. Once you've identified these, test the power wires using a multimeter, to ensure they are delivering a consistent voltage. Connect the CAN H and the CAN L wires of your immobiliser with the grounding and power points.

Once you've made all of the necessary connections It's crucial to double-check them and inspect the immobiliser for indications of corrosion or damage. The process of entering a PIN and launching the vehicle is a great way to test the system. This should be a regular part of your daily routine since it allows you to spot any issues that are intermittent early. Regular testing will help to extend the life of your device and ensure it is functioning at its peak.

Preparing the Vehicle

The installation of the Ghost immobiliser is a complex task that requires the right tools and expertise. A wiring diagram of the vehicle is vital to identify the proper wires and making precise connections. A multimeter can be used to verify the electrical properties and ensure security. Insulation tape and cable ties can be used to guard the connections from tampering and to ensure they are secured. A user's manual is available for the Ghost Immobiliser. It will give you specific instructions specifically tailored to the model.

Once installed the ghost immobiliser will prevent unauthorised engine start by requiring the owner to input a unique PIN code sequence using buttons on the steering wheel or centre console. The code can be changed at any time by the vehicle owner either by hand or remotely via an app on mobile. The device is also silent and is undetectable to thieves because it does not emit radio frequencies.

A ghost immobiliser is connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals generated by the ECUs and prevents the engine from starting if a false signal is detected. The system is weatherproof and tamper-proof. It has no keys or LED indicators that could draw the attention of thieves.

It can be placed behind the dashboard or in a discreet area, so that it is not visible to thieves and doesn't interfere with the vehicle's performance. It can even be mounted in a small container, making it less likely to be discovered during an inspection by unscrupulous salespeople for cars.

Its stealthy operation, along with its integration into the vehicle's CAN-bus system makes it an effective deterrent to vehicle theft techniques, such as signal relay attacks and key cloning. The system can be paired with other security measures to create a formidable barrier that will frustrate even the most ardent thieves. More and more insurance companies are recommending or require ghost immobilisers because they can reduce the cost of insurance.

Making Connections

In contrast to traditional security systems that are heard by thieves ghost immobilisers are silent and prevent them from knowing when your vehicle has been switched on. They also stop the high-tech methods used to steal vehicles, for instance, OBD port hacking. They can also be put in without leaving permanent marks on your car, making them an excellent choice for people who plan to sell their vehicle in the near future.

The autowatch ghost immobiliser Ghost 2 is a immobiliser for CANbus that is one of the most reliable and advanced solutions to stop car theft. It disables your engine using the CAN data network and creates a unique PIN code, which is difficult for criminals to guess. It can be used in a wide range of vehicles, and it works with all the features that are already in place like car alarms and steering wheel locks. GPS trackers and door lock bypass.

If you decide to opt for a Ghost immobiliser, be sure to refer to the wiring diagram for your particular car model to identify the wires that require connecting. Check their locations to ensure they're accurate, and label them or tape them to help remember them. You will also need to find a source of constant power (12V) and an earthing point for the system. Once these are in place, you are able to begin to make the connections needed to complete the installation.

When the ghost immobiliser price immobiliser is connected to your CAN bus it will prevent your vehicle from starting unless you enter a pin code using the buttons on the dashboard or steering wheel. This will stop ECU cloning and other methods of stealing vehicles. Additionally, it can be combined with other Thatcham-approved security accessories, such as alarms and tyre clamps to provide your vehicle with an additional level of protection.

As the UK automotive industry grows, so do the options available for protecting your car. With so many avenues for thieves to gain access and steal your car, it's vital to do everything you can to prevent it from being taken away. This is why ghost immobilisers are very popular among responsible car immobiliser ghost owners.

Testing the System

The Ghost Immobiliser communicates with the vehicle's ECU using a CAN network. This stops the engine from starting until the PIN code has been entered. This makes it very difficult for thieves to copy your key fob and then start your vehicle, and more difficult to disable the system through hacking into its electronics.

Ghost Immobilisers are also able to be used together with GPS tracking devices, which can help you track your vehicle's location and identify it if it's stolen. This feature is not commonly found in security products that are sold aftermarket however it is an excellent way to improve the security of your vehicle and give you peace of mind.

In addition to providing increased security, in addition to providing enhanced security, the Ghost-II immobiliser offers a convenient user experience by eliminating the need for additional key fobs or devices. It comes with an easy and intuitive PIN code entry system that is seamlessly integrated into your everyday routine. It also has convenience features and deactivation modes that allow you to temporarily disable the immobiliser to valet park or service your vehicle.

Before you begin the installation process, familiarise yourself with your vehicle's wiring and prepare the required tools. A basic set of tools will enable you to make precise connections. A multimeter can be used to verify electrical values. Insulation tape and heat-shrink tubing are essential to protect connections from short circuits. Cable ties can also be used to secure wiring. It's also important to work in a place that is well-lit and wear protective gear when working with electrical components and tools.

You should test the Ghost immobiliser after you have completed the installation to ensure it's working correctly. First, you need to try to start the vehicle without entering the PIN code. If this fails, you'll need to test the system again and conduct a more thorough inspection of the connections.

The Ghost Immobiliser, unlike other security systems, is a hidden device that cannot be recognized by thieves. It is also far more effective than physical deterrents like wheel clamps and steering locks. It is TASSA recognized and approved by a few insurance companies, making it a cost of ghost immobiliser-effective investment that will give you the peace of mind that you deserve.