• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable item from theft. This system is discrete and does not require additional key fobs in order to operate.

The device uses existing buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence of up to 20 presses. This allows your vehicle to start.

Simple change of PIN code

With the growing rate of vehicle theft, a lot of owners are looking to upgrade their security. There are a myriad of aftermarket security devices available including tracking systems, immobilisers and alarms. They're not all equally effective in protecting your vehicle. While a tracking device can assist in finding your car in the case of theft, it does not prevent the crime from occurring in the first place. Immobilisers, on the contrary, does exactly what it says on the tin: it disables the engine of your vehicle to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your vehicle.

The ghost device utilizes the buttons on your car to create a unique sequence that must be entered in order for the engine to begin. This can be done by using the heater, window or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without having to use the button sequence. This is a great solution if you want to give your car to valet parking or servicing. The immobiliser will stay in operation.

The auto ghost immobiliser is a truly unique and innovative device which is used in conjunction with the buttons in your vehicle instead of being a separate device. This means it's not just a highly effective security measure against theft from your vehicle but also a transferable device to any future vehicles you own, making it much more of an investment than traditional steering wheel locks.

Weatherproof small device

The Autowatch ghost immobiliser is a high-tech security system that protects your pride and joy against key cloning, hacking and ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be fitted into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which are a common technique that car thieves use to get around immobilisers.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technology as well as detected by traditional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons in your vehicle, like the steering wheel, the centre console, or door panels, to create unique sequences for disarming. The sequence can be extended to 20 presses for extra security. The iPhone app allows a single, authorised connection, with a pairing code that is unique to the Ghost and the communication between the two is secured.

The Ghost prevents car thieves adding a new ignition key or replacing the ECU in order to bypass the immobiliser. The engine can only be started only if a valid PIN has been entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can hand your car over to a valet service for maintenance without having to enter a PIN.

Tested for each vehicle

The Autowatch ghost car immobiliser is the world's first aftermarket CAN bus immobiliser that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to disable your car's system from going through its normal start-up routine until you input the passcode you have created. The system can be turned on and off through your smartphone's app without the need for additional wires.

The standard factory immobilisers work by using a transponder that is integrated into the key. It transmits a message to the ECU. The car will start when the correct code is sent. However, if a transponder of a different vehicle is used instead, the immobiliser doesn't recognize it. This makes it possible for the vehicle to be stolen and then started. The Ghost immobiliser was developed by a South African company at the top of security systems for vehicles technology. It safeguards your pride and joy from hacking, key cloning and even key theft. Only by physically towing your car away from thieves could they take it away, and they would still not be able to drive the vehicle.

Ghost utilizes the buttons of your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate a unique, changeable PIN code sequence that needs to be entered before you can use your car. This is done without extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, so thieves are not able to use sophisticated RF scanners or code-grabbing technologies to identify that an installation has been made.

auto ghost immobiliser is more difficult to get rid of than car alarms, which require disarming by pressing the buttons. This makes it an excellent alternative to a GPS tracker which helps locate your car after it's been taken.

Override of emergency PIN code

You don't need to look too far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow you to start your car without the original key fobs.

Our Ghost immobiliser combats this issue and offers an additional layer of security to prevent your vehicle from being stolen when it is targeted by thieves. It works by creating an individual pin code push sequence using the buttons you have on the steering wheel, door panel and the centre console. The unique pin code is entered along with the original key fob to stop the engine from getting started. The unique PIN for override can be found on the black card that you will receive following installation. It is simple to remember since there aren't any LEDs.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, therefore it cannot be identified by modern thieves using diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to a tracking device.

In contrast to other security systems that have a relay inside the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to shut down a vehicle completely, by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker to these systems, but this has to be specified before installing the device. They also work with valet/service modes and an excellent alternative to a tracking device when you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet Mode

In recent years there has been an increase in vehicles being stolen with the owners' keys. With easy access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to steal your joy and pride. To prevent this from happening, we have launched the autowatch ghost immobiliser (moved here) that prevents your car from being driven even if your keys have been cloned or your car has been hijacked.

It connects directly to your car's ECU (Engine Control Unit) through the data loop called CAN. It's completely silent since it doesn't use radio frequency or a key fob. It isn't detected by diagnostics or any other hacking device. It also protects you from adding the new ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, centre console and door panels. Before you can begin your car, you must enter a unique, changeable PIN code that can be as long as 20 digits.

This is the very first aftermarket CAN-bus immobiliser for the market that is being created. It will prevent your vehicle from being driven or started when you don't enter a PIN code before entering. If the device is in armed and you attempt to drive away, it will display a warning on your dash which will flash continuously for about 300m, if you enter your PIN code at this point, it will disable the anti-hijack and your car will continue to drive in the normal way. If you do not enter your PIN at this time, the indicator will continue to flash and require a new PIN code every time you try to start your vehicle.