• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Change a Subaru Spare Key

Contact a locksmith if have lost subaru key fob your Subaru key. Usually, they will cut replacing a subaru key new key for you at a lower cost than the dealer.

Subaru car keys are generally either intelligent "push-to-start" fob remote keys or basic metal locked keys in subaru forester. The Fob key needs to have its chip programmed.

Keyless Entry System

The key fob can be used to lock and unlock your Subaru remotely. It also opens the trunk of your vehicle or the lift gate. These remotes make use of a keypad in your car to communicate with the computer in your vehicle.

Certain models of Subaru come with a lesser-known feature called PIN Code Access. This lets you utilize a personal number sequence to start and open your car. If you own a newer Subaru Forester, Outback, Crosstrek, WRX, WRX STI, or Impreza which came with this feature, check your owner's guide to find out how to utilize it.

It's likely that the battery inside the key fob is dying. You can test the battery life of your key fob using an electronic tester that you can carry around or a multimeter that you have in your garage.

The next step is to take the circuit board of the transmitter from the key fob and then examine it. This board will have one or two sets of eight-digit numbers, so jot down the first set so that you will be able to remember it later. Once you've finished then put the key fob back together and you'll be able to begin programming it at home. This procedure differs based on the model and year your car. However, it's usually easy enough to do yourself.

Key Fobs

Subaru's latest models all feature key fobs that can not only unlock the doors however, they also turn on your lights, lock the gas cap, and start your vehicle. That last trick is especially helpful if you've been at the pump only to find that your car won't start because the battery in the key fob failed.

It's likely that your Subaru's key fob, regardless of whether it is old or new it is able to be replaced. Be aware that some more modern models, which have the latest technology, may require an appointment with a dealer. With little effort and some time, you can make your own replacement key fob.

Begin by opening the case and looking at the circuit board of the transmitter. (Instructions on how to open the case are usually provided in the owner's manual). There should be two or more serial numbers with 8 digits each. Keep the first set of numbers handy for later references.

Then, sit in your driver's seat and close all doors. Turn the key to start your car, then turn off after ten revolutions. Press the lock button on your key fob and then open the door to verify that your doors function properly. After that close the door and remove the key from the ignition. You should hear the chime from your car, signalling that the key fob has been programmed.

Ignition System

The battery for the key could be dead if your Subaru keys aren't functioning as they should. If you are aware of the issue, you can replace the battery of your key fob yourself. A replacement battery is cheap and fairly easy to find. If the key fob isn't responding to your commands, it may be due to a different issue. To get a spare key, it's advisable to go to an authorized dealer. They'll ensure that the key is a genuine Subaru key that's under warranty. It will also be programmed to your vehicle. This is much simpler and more secure than purchasing an aftermarket key from a retailer online.

The dealer will also cut keys for you, provided you give them your VIN number and as evidence of ownership. They'll use this information to code the new key to ensure that it will be accepted by your immobilizer. This is a much more complicated process than cutting a key, and the dealer will charge more for it.

After the new subaru key key has been programmed it will be able to change it over to your existing key. It takes only five seconds to insert the second key, which is why it's essential to keep a working key handy. You can take the key off after the security light been off and you've tested it.

Battery Replacement

Subaru fobs are extremely beneficial because they can switch on the sunroof and power windows in your car with just one button press. But, the battery in your Subaru key fob was not made to last forever and will eventually require replaced. This short guide from Capitol subaru outback key replacement car keys subaru; Link Website, will help you to replace the battery yourself.

To begin, you'll need to locate the small crevice within the seam that separates the front and back of your key fob. With a small screwdriver, you can pop the seam to reveal a small area inside that houses the battery. Remove the battery that was in it, and then replace it with a fresh one, making sure that it is facing the right side up. Once you have assembled everything you can use the new key fob to lock the vehicle, unlocking it, and then starting your vehicle.

You should always have a spare set keys, especially if one is damaged or has gone missing. You can purchase a brand new key at your local dealership or get it cut by locksmiths. It is important to ensure that your key fob is working properly as soon you can so that you can drive safely.