• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

As time passes, the handles on your doors will wear out and require replacement. When replacing them, it is important that the new handles are in line with the exact dimensions of the previous handle.

The top screw's position the lever, and the keyhole size are the three measurements that you need to verify. Check the size guide for assistance with this.

Inline Lever/Lever

A lever handle is a modern door handle that is designed to fit new or replacement doors. This type of handle is available in various designs and finishes. This handle is offered by a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are made of robust materials and are perfect for multi point lock doors that require a strong design. The handles are inline and operate from the same spindle and screw fixings so they can be easily fitted to new or existing uPVC/Composite doors.

The spring lever design allows the handle to be set and angled for comfortable operation and is suitable for all users. The handle has been tested for endurance up to 200,000 cycles. This helps to ensure the quality of the finish as well as the performance of the handle over time. The sprung lever can be cut to fit the widest range of locks. This is particularly useful for doors with narrower frames, where the cylinder is located further back. A lever that is shorter is an ideal choice for doors where the latch can be operated by a thumb turn on the inside.

Lever Pad

A Lever Pad door handle for patio door made of upvc functions differently to the lever type handles that are found on the majority of doors. These handles are operated by a single spindle or by two spindles inline or offset. They are typically employed on UPVC double glazed doors. They are available in a variety of variations and finishes.

The handles have been tested to at least 200 000 cycles and are available in various finishes like White, Silver, Chrome & Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high level of durability and performance for its intended use.

All UPVC lever pads for handles come with a spindle, screws and can be installed on a uPVC door. The backplate fixing centers of 211mm allow for a larger size handle that can be beneficial when replacing a faulty or worn multi point door lock mechanism. The handle levers come with springs, which can solve the problem of door handles that move out of the horizontal position when not being used.

When choosing the replacement upvc door handles UPVC handle and spindle it is important to match the PZ dimensions of the multipoint lock as well as the uPVC door. This measurement may also be referred to as 'handle centres or cylinder centre'. It is important to match the right handles.

After you have identified the correct size of PZ and the correct PZ size, you must ensure that the lever and push pads are designed to match the American with Disabilities Act compliant handles that you need for your door. They are typically square or round with an internal lever and an external push pad.

The majority of the UPVC Lever Pads we sell are spring-loaded. This means that they return to a horizontal position when not in use instead of hanging, and possibly sticking in the frame. This helps prevent the draughts and cold air from getting into a house. The majority of UPVC lever pad handles are available in left and right handed versions, allowing them to be placed on either side of the doors.

Euro Cylinder

Cylinder locks can be found on uPVC and other types of doors. They operate by using a key that unlock a cylinder case that will reveal pins that can be aligned with the pins in the lock body and permitting them to turn an revolving cam, opening the door. Euro cylinders can be fitted with up to six pins. External and internal doors require different levels of security.

Selecting the right cylinder for your needs is crucial; it depends on the way your doors and handles are utilized. For instance, doors that are external must be secured with an extra secure cylinder, while doors inside can be secured with an ordinary cylinder. Some cylinders have extra features that increase security, such as anti-drill or anti bump properties.

To ensure that the euro cylinder is the correct size for your door, it should be measured correctly. The cylinder should be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn, in the event that one is present. If you cannot measure with the lock in position, you can take it out of it. It is important to not have a cylinder that extends beyond the handle or escutcheon. This could make it vulnerable to lock snapping attacks.

Most modern cylinders are constructed with anti-drill and bump resistance features that are built into their design. They are designed to decrease the chance of a attack by causing the cylinder to rotate in a different direction. This can help to deflect an attack and ensure your door is secure.

There are cylinders made to resist snapping. This is a more frequent method of attack on cylinders, where the break line inside the lock is attacked with a special tool to break off the front of the cylinder to allow the door to be opened. This is faster and more straightforward than opening the door with multipoint locks. It also leaves no evidence of a burglary, which can impede the insurance claim.

Spring Cassette

The spring cassette is located in the base of the door handle backplate, supplying a spring-loaded solution and returning your multipoint lock handles to their normal position after use. There was a time when handles did not have a spring built into them and without this they tend to droop or drop once the locking mechanism is disengaged. This simple component is the most effective way to fix this problem. It also helps prevent your door from getting stuck in the closed or open position as they aren't easy to close manually.

These spring cassettes were created to be used with a spring multipoint locks. They will not fit unsprung handles and you'll need to cut a hole in the backplate to allow them to fit. (Please see the image for a technical diagram). They are a replacement for broken or missing cassettes in the backplates of door handle replacements handles of many brands of uPVC doors. They are supplied in one unit. They come with a square cut out that can accommodate an 8mm shaft.

These spring cassettes offer an excellent value solution for the issue of sagging door handles. They are easy to fit and will prolong the lifespan of your uPVC doors. Please contact our team to learn more about our selection of uPVC accessories and spares. We are always happy to provide expert advice and support you.