• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Install a Ghost Immobiliser

A ghost immobiliser is an effective deterrent to car thieves. By using this device in conjunction with other security systems and remaining alert, you can build an effective defense against modern, technologically-savvy thieves.

Ghost immobilisers will shield your car from hotwiring and relay car thefts by having you enter a pin code in order to start your vehicle. It works by using buttons on your steering wheel and centre console, making it inaccessible to criminals.

Identifying the Wires

It is essential to secure your car as more and more vehicles are being stolen without the owners' key. While thieves may be able to duplicate your key fob, or even steal the vehicle's system by hacking it, a ghost immobiliser adds an additional layer of protection by blocking all signals coming from the key fob and making it impossible to start your vehicle without entering a PIN code.

You can install the ghost immobiliser yourself, but it is recommended to let a professional do the job. A professional with experience will know where to place the unit and also how to properly connect it to your vehicle's wiring. The installation process can be complicated, and it is essential that the connections are done correctly to avoid issues or malfunctions.

Wearing safety equipment and working in a space that is well-lit will help you achieve the best results. It is also recommended to read the user manual and familiarise yourself with the wiring system. This will assist you in identifying the wires required for installation and ensure that you have the proper equipment and components to complete the job properly.

After the wiring is connected, you are able to reconnect your battery and test to determine if the system is functioning properly. To prevent electrical problems be sure that the battery's terminals have been secured. Also, mark the CAN H and CAN L wires using labels or tape so that you can keep the track of them during the installation process.

If you would like to allow someone else to drive your vehicle for a short period of time, such as for valet parking or when your vehicle is in for a service, the Ghost Immobiliser can be put into Transport Mode. This lets you input the code through a service button located on the steering wheel, centre console or door panels, and it will then enter the PIN code change mode.

Some thieves try to bypass ghost 2 immobiliser near me immobilisers through jamming and spoofing devices which block or send fake messages to the system. This can be overcome by investing in advanced anti-jamming technologies and monitoring your Ghost Immobiliser for indications of altering the system.

Disconnecting the Battery

The Ghost immobiliser 2 immobiliser is a cutting edge security device, was designed to prevent car theft. It utilizes cutting-edge technology to detect the engine and then deactivate it when the correct PIN is entered. This stops the vehicle from being taken by thieves. The system is extremely efficient and stealthy, with no visible indicators to stop criminals. However, there might come an occasion when you have to remove the unit for maintenance or upgrades, or to sell your car.

This procedure requires special tools and expertise, since you will be working with wires and bypassing certain factory components. Additionally, it is crucial to follow the step-bystep instructions given by the maker of the ghost immobiliser. It is recommended to consult an expert mechanic or auto electrician, particularly if you're not familiar with working on automobiles.

It is important to check the condition of your battery after identifying and disconnecting the wires. Check that the battery is clean and free of corrosion and that all connections are secure. If necessary, consider replacing the battery to ensure that it is strong enough to handle the electrical demands of a security system that is aftermarket.

After you have disconnected the wiring you can take off the ghost immobiliser. Wire cutters or strippers can be used to disconnect the wires. Be careful not to damage the wires or their terminals. Label each wire to make it easier to reconnect them in the future. If the wires have been soldered, use an instrument that can withstand heat to break the connection. To avoid short-circuits, it is essential to wrap the wires in insulation tape or heat shrink tubing.

Reconnect the wires with the constant 12V power source. Use the fuse tap to safeguard the connections by using fuse. Finally connect the grounding wire to a grounded point on the vehicle's chassis.

After you have connected the wires, restart your vehicle and enter the PIN. Then, you can restart the engine. If it doesn't start then the ghost immobiliser has been successfully removed.

Making the Connections

Ghost immobilisers are an affordable method to increase the security and safety of your vehicle. It connects to your car's CAN bus system, intercepting signals and stopping the engine from running until the correct PIN code is entered. It is nearly impossible to disable. It's an excellent choice for those who want security and peace of mind. When used in conjunction with a Thatcham Approved tracking system, it can help lower your insurance premium.

It is crucial to get and study the wiring diagram for your vehicle model before you begin installing. The diagram will act as a roadmap for locating the necessary wires to make precise connections. Making use of the correct wiring connectors or soldering techniques will ensure that the connection is strong and secure.

The wires that connect the Ghost immobiliser with the CAN bus need to be identified correctly and connected. Use small labels or tape to label the CAN L and H wires. This will avoid confusion during installation. The locations of these wires will be different for every vehicle, which is why it is essential to refer to the wiring diagram of your vehicle and online resources to identify them.

After the correct wires have been connected after which the power to the Ghost immobiliser will be restored. It is recommended to test the immobiliser by starting the engine but not entering the PIN code. This will confirm that the immobiliser has been installed correctly and is functioning in the way it was intended. It is important to test your immobiliser regularly. This will allow you to identify any problems or issues early.

Another benefit of the ghost immobiliser cost immobiliser is that it can be installed within a matter of minutes and does not require any cutting or modifications to the wiring inside your vehicle. It is a fantastic option for those looking to add more security to their vehicle, since it can be used in conjunction with an Thatcham approved alarm or tracker to send you a notification on your tablet or phone if the vehicle is compromised.

Mounting the Unit

The ghost immobiliser car immobiliser can be used as an deterrent to thieves of cars, particularly when combined with the use of a GPS tracking device. The device uses existing buttons in the centre console, door panels, and the steering wheel to create a unique sequence that only you can recognize to stop your car from starting. It is also tamperproof and weatherproof. It also has a three-year warranty and is recommended by a range of insurance companies.

It is crucial to follow the instructions when installing the device. If you're not sure you're not sure, consult an expert. A multimeter and wire stripper are essential tools to identify the wiring and making precise connections. It is also recommended to purchase insulation and electrical tape to protect the connections against damage. It's a good idea to test your device after the installation is complete to be sure that everything works as it should.

Ghost immobilisers are an excellent way to secure your vehicle particularly in areas that have high rates of crime. It can be paired up with an iPhone application for easy management and monitoring. It blocks key cloning as well as ECU swapping and other security threats. It's popular among vehicle owners who want to safeguard their investment.

The autowatch ghost immobiliser II immobiliser is designed in a low-profile, sleek appearance that makes it invisible to thieves. It is connected to the CAN (Controller Area Network) system of your vehicle and prevents the engine from starting without a PIN code being entered. The PIN code is created by pressing a number of buttons on your steering wheel, console or the door. It is also able to be changed at any time. The device is also secure against tampering and comes with a GPS tracking system to aid police in locating your car in the event of theft. It's an excellent option for protecting your vehicle from thieves and is Thatcham-approved.