• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a warm way to heat a room and also save energy. However, they need an amount of care.

Many modern wood stoves meet EPA emission guidelines. Look for an EPA sticker either under or on the grate, to ensure that your stove won't produce lots of harmful pollutants.

How to Start a Wood Fire

The smell and sound of a wood fire could be a welcome feature in any home. It's essential to understand how to build a fire on your stove. Unintentional methods can lead to an unburned fire that doesn't burn well, and may produce creosote or smoke. The following tips can help you start a fire that is safe and can heat your home quickly and effectively.

Before you start an fire, make sure you check the condition of your logs and coals. If they're wet, it will smother your fire and prevent the proper burning. You might want to open the chimney to remove any ash that has fallen into the stove.

Begin by placing a few small wood burner stoves (click here for more) newspaper pieces that are dry and clean in the stove. This will help spark the tinder and ignite your kindling. After the tinder and kindling have started to burn, you can add the larger kindling pieces on the top. This should be done in a crosshatch pattern, so that there is air between each piece of wood.

If you own wood stoves that have an automatic control of combustion, it will automatically feed an air stream controlled to the flame as it heats. This will allow the fire to burn continuously without having to open the stove's door frequently to check on it.

It is important to not use too much tinder, as this can lead to the fire burning at an excessive rate and doesn't use the fuel as efficiently as it could. When you have a good fire and a bed of tinder in your stove, begin the main fire by placing two large base logs across the grate. Then, you can lay an additional layer of smaller logs perpendicular to these and on the top of the base logs. This method of creating an ember called a "top-down" fire can result in a successful and long-lasting fire that will not engulf the larger base logs.

Close the damper after your fire has been established and keep it closed. Doing this too soon can cause the fire get smothered and not allow for proper air flow, which will lower the effectiveness of the fire.

Add Wood

Stoves can be used to efficiently heat your home and save you money. They can be used in conjunction with central heating systems or furnace to provide additional heating for large houses. A lot of the clean-burning stoves on the market utilize a superior combustion method that separates the burning of volatile compounds from combustible gasses and tar by supplying air in two different stages. The first stage is for the vaporization, while the second is to supply fresh air that has been pre-heated. This improves combustion and reduces smells.

The amount of heat you will get from your stove is contingent on the kind of wood used as well as the amount of moisture and the size of the logs. To let the wood dry, logs should be stored in a well ventilated area for a few months before burning. If the logs are soaked with too much moisture, they will produce steam, which is basically wasted power.

When you are burning the fire, you should add more wood to the pile at intervals, but not all at all at. In addition, adding too much cheap wood burning stove all at once could cause the temperature to rise in the firebox, creating the formation of a vortex that pulls smoke and volatile compounds that are not burned back into flames. This could decrease the efficiency of your stove.

It is recommended to stay clear of other combustibles such as paper or cardboard in your stove, since they are not wood and possess different physical properties and cannot be burned without creating dangerously high temperatures and exorbitant emissions. You should not burn compressed combustibles like wood briquettes since they differ in physical and chemical composition from firewood. They are also not approved by the type to be used in wood burning stoves.

It is essential that a professional install and test your wood burning stove. A certified WETT technician can test your stove to ensure it is safe and functional. They will also ensure whether your chimney is working properly. They also provide maintenance services to keep your chimney and stove in top condition. They will look for leaks in the areas that are accessible to your chimney, and fix any problems they find. They will also ensure that the occupants of the house understand and adhere to the fire evacuation procedures in the event of an accident.

Adjusting the Damper

When you're not using your stove, a damper regulates the amount of heat that is lost through the chimney. Additionally, it can also help you manage the fire. If the flue opens but the damper is not closed the fire will not be able to burn as it should and smoke will pour into your home. You can adjust your damper to get the best flames by experimenting with different positions.

It is important to keep your damper open to allow air to flow into and out of the flue while a fire is burning. This will let the fire start and stay lit for several hours. The proper opening will stop the fire from being deprived of air and keep it from blowing smoke.

To properly adjust your damper first, make sure that the fireplace is preheated and the wood burner for shed stove is hot. This will ensure the chimney is warm and that it has a strong draft. After that, the wood stove damper can be adjusted.

After the fire has burned for a while, you should shut the damper around three quarters of the way. This will stop the warm air in the room from venting through the chimney, while allowing smoke to escape out of the wood stove.

This is the best method to keep your fire lit and keep it from getting too hot. If you shut the damper too tightly, it could stop the draft from working, however should it be too open a cold breeze could enter your home.

You can determine how much the damper is opened by placing your hands near the top of the inside of the flue pipe. If you feel a small breeze rubbing against your hand the damper is probably in an open position.

The damper's setting can vary slightly from one stove to another and even between different types of wood. Experimenting with the various settings will give you an idea of what to look for, but you will need to adjust until you get the ideal setting for your stove.

Clean Up

After the fire, it's important to clean the flue and stove. This can lower the risk of a chimney fire which is the primary cause of wood stove related fires in homes. Creosote, a sticky material that can accumulate in the stovepipe, is extremely hazardous. Moisture and unburned particles of wood that cannot escape the flame are the reason for this substance. It can also be caused by poorly lit fires.

A regular cleaning routine can help keep the buildup of creosote at bay. The most effective method for doing this is by sweeping the chimney every year. It is also recommended to have your fireplace and stove professionally cleaned and inspected at least once a yearly.

Also, it's an excellent idea to clean the ash tray and grates regularly. It is best to only burn wood that has been seasoned, as it will produce less creosote. It is also an excellent idea to avoid burning cardboard, paper plastic, and other waste items. These can release chemicals that can be dangerous for the flue and air, and could be released into your home.

The glass on the wood burning stove has to be cleaned frequently too. Many newer wood stoves are made with self-cleaning glass, which means they do not require much scrubbing. You can make use of stove glass cleaners on the glass if you aren't able get the glass as clean as you'd like on your wood stove.

Other helpful suggestions for maintaining your wood burner stove for shed stove are to turn the vent off when you're not using it and slamming windows or doors to allow more air flow. This will keep the fire burning more hot and more efficiently, since it will not need to exert as much effort to circulate air. It is recommended not to stack logs, or leave them on the fire for an extended time. This could cause splitting and warping. It is advised to avoid using combustible wood that has been compressed in your wood stove since the paraffin that is contained in them can melt and flow into the flue and cause damage.