• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discreet & does not require any additional key fobs in order to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be altered up to 20 times. This will allow your vehicle to start.

Simple PIN Code Change Process

With the rising rate of vehicle thefts, many owners are seeking to improve their security. There are a myriad of aftermarket security devices available including tracking systems, immobilisers and alarms. However there are a few that are equally effective in protecting your car. A tracking device can assist you in locating your car if it is stolen however, it won't stop the crime. Immobilisers, on the contrary are exactly what they state on the label - they disable your car's motor so that it can't be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

The ghost device utilizes the buttons on your car to generate a unique sequence that must be entered to allow the engine to begin. This can be accomplished using the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without having to use the button sequence. This option is particularly beneficial if you have to give your car away to a valet service or parking because the immobiliser will still be active and not deactivated.

The Ghost is a very unique and innovative device which works in conjunction with the buttons in your vehicle rather than as a separate device. It's not just an effective deterrent for vehicle theft and vandalism, but it can also be used on any future vehicles you own. This makes it a better investment than a conventional wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is a high-tech security system that safeguards your pride & joy from key hacking and cloning. It also stops ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to stop the motor. It can be placed in the vehicle without the need for extra wiring and has been extensively tested to ensure it is compatible with all vehicles. It is also immune to jamming devices that are a popular method used by car thieves to get around immobilisers.

The advantage of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning and code-grabbing technology, nor can it be identified by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators and instead uses buttons on your vehicle, such as the steering wheel, the centre console, or door panels, to create a a unique disarming sequence. You can create a sequence that is as long as 20 presses to provide additional security. The iPhone app only allows one connection, using a unique pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also prevents car thieves from using a new key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run when a valid PIN code is entered. It is also possible to put it into valet/service mode for a temporary operation (with specified parameters, such as a 30mph speed limit) so that you can give your car to a valet service for servicing without the need to enter a PIN.

Each vehicle is tested

The Autowatch range rover vogue ghost installer is a world-first aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device is able to intercept signals and prevent your car from starting normally until you enter a customized code. The system can be turned on or off through your smartphone's app, without the need for extra wires.

The standard factory immobilisers work by using a transponder that is integrated into the key. This transmits a signal to the ECU. The car will start if the correct code is sent. However, if the transponder from a different vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle be stolen and started. A South African company that is at the forefront of car security systems technology has developed the ghost ii immobiliser immobiliser. It safeguards your car from key cloning, hacking and even key theft. The only way a thief could steal your car is physically towing it away and even then, they would not be capable of driving it.

bmw m4 ghost installer uses the buttons in your vehicle, including the indicator stalk as well as the steering wheel and door panels to create an individual, changeable PIN code sequence that needs to be entered before you can use your car. This is done without additional hardware, like key fobs. It can take up 20 to 20 presses. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals so thieves are not able to use sophisticated RF scanning or code grabbing techniques to determine if the security system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks ferrari ghost installer is hidden within the vehicle so it can't be taken away or disabled by thieves. It's also harder to remove than a car alarm that requires disarming with the use of a button sequence. This makes it a perfect supplement to a GPS tracker, which can help locate your car after it has been taken.

Override of emergency PIN code

You do not have to look long on social media sites to find stories or videos of vehicles that have been stolen with the most advanced technology tools. This includes key-cloning and hacking tools that allow the vehicle to start without your original key fobs.

Our Ghost immobiliser fights this issue and offers an additional layer of security to prevent your vehicle from being stolen when it is targeted by thieves. It creates an individual pin code by pressing the buttons on your steering wheel, door panel and centre console. The unique pin code must be entered in conjunction with your original key fob to prevent the vehicle from starting. The unique override pin is found on a black card which you will receive following your installation. It is simple to remember because there are no LED indicators.

The device is hidden within the vehicle's wires and doesn't emit any radio signals, therefore it can't be identified by modern criminals using diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to a tracker.

Unlike most other security systems that use a relay in the engine bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable a vehicle completely, by sending an electronic block to the ECU and engine.

They can also be linked to a separate analogue alarm, immobiliser or tracker. This should be decided prior to the installation. They are also service/valet mode-compatible and are a great alternative to a tracker if you are you have your car checked for repair at the dealers.

Service/Valet mode

In recent years there has been an increase in vehicles being stolen with the owners' keys. It's now easier than ever to steal your pride & joy due to the availability of key cloning tools and door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if your keys have been cloned.

It communicates directly with your car's ECU (Engine Control Unit) through the data loop of CAN. It is completely silent, as it does not use radio frequencies or key fobs. This means it cannot be detected by diagnostics or other vehicle hacking devices. It also protects you from introducing the new ECU or key to bypass the system because only the PIN number allows the engine to be started.

The device is hidden in your car and can be reached via the buttons on your steering wheel, center console, and door panels. Before you can start your car, you must enter a unique, changeable PIN number that is up to 20 numbers.

This is the very first aftermarket CAN-bus immobiliser that was developed. It can prevent your vehicle from being started or driven in the event that you do not enter a PIN code first. If you're driving away with the device in motion the indicator will flash on your dashboard and flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate normally. If you do not enter your PIN at this point, the indicator will keep flashing & will require a new PIN code every attempt to start your car.