• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this instance, you will need to source some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass so that any shards fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional is able to repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is substantial, you may need to consider a security screen that also has windows. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, over time, they can suffer from a variety of issues, including sliding. A sagging upvc window repair window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to open the windows to reach the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the size of the window, tighten the screws to secure them in place.

If you can't reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows remain watertight and safe from drafts.

upvc window repair near me handles can also loosen up. Often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close your window and do a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be put on. It is crucial to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to remember that if the leak is coming from between the glass of your double glazed window repairs near me glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it blows open with the breeze. They can be repaired by any DIYer who is skilled and can be completed in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is an easy process, but it's easier when you have a person to help you hold the frame up.

Verify that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused either due to opening the window repair near me in the wrong way or due to a poor installation in the factory. Sending us a picture via our website will often resolve the problem. We are more than happy to offer suggestions.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges, also because of wear and tear, could become misaligned. This can cause a gap to form where the sash joins the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window, can also be misaligned, and again it is possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

Another, and most effective methods to reduce drafts is to use an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be positioned on the top of your windowsill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide excellent insulation and security for your home. However, it is important to recognise that all windows have a life span and there may come a point where it is more efficient to replace them than repair them. So, if you are experiencing issues with your upvc window repairs windows, it is always recommended to seek help from a professional as soon as possible.