• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Unstick a Suzuki Ignis Key

Suzuki's quirky, cheap little city car is getting a midlife refresh. It's not a hot hatch, however, it handles urban and rural tarmac well. And its tight turn-in circle makes driving in the city an easy task.

The new model also comes with clever driver assistance and safety tech with features like lane departure alerts and a drowsiness alarm that is a welcome addition to long drives.

Steering Lock

The steering lock is a security feature that stops your Ignis from being stolen when it's in gear. It's a great security feature however it can be a hassle when you're in a rush and you're unable to unlock your steering wheel. Fortunately, there are some easy things you can try to fix the problem.

First, make sure the ignition switch is set to "on". If this is the case, then try turning the key in the same direction you did before the wheel became locked. This may be a bit difficult however it's usually enough to unlock the wheel.

If the wheel does not unlock If it doesn't, you could spray a small amount of canned air into the ignition cylinder to help lubricate it. Wear eye protection to prevent getting canned air in your face. You can also apply liquid graphite to help lubricate your piston.

If none of them work then you'll need to replace the ignition assembly. Fortunately, this is an easy component to locate at any auto parts store. Make sure to purchase an identical replacement key for suzuki swift and then compare it to the original before attempting to install it. Uncover the ignition to reveal the ignition assembly.

Worn

The steering lock may bind the ignition switch, causing the key to get stuck. This security feature is designed to stop your Ignis from moving while the engine is running. If this occurs it is possible to unbind the steering wheel by manipulating it.

As time passes the Ignis keys get worn out and become harder to turn. It might not occur as often as a defective switch, but it does occur. If this is the case, it is recommended to replace your key.

Check to see if something can block your Ignis ignition key from entering the cylinder. There could be dirt or debris that may get stuck inside the ignition cylinder, preventing it from turning.

Then, you can try a little oil to see if it aids. There are many different types of lubricant that you can purchase, so take a look around your garage or visit an auto parts shop in your area to find one that can work.

Another alternative is to use an silicon "glow in the dark" key cover. These covers absorb light energy and release it when in dark or murky conditions. They also protect your keys from wear and tear. They are available for a variety of suzuki celerio replacement key models and can be bought on the internet or at an Suzuki dealership near you.

Bent

Over time and through frequent use, a key could get bent. The teeth of the keys may not connect to lock cylinders in the same manner. This can prevent the key from turning. If this is the case, the key will need to be replaced. If you have a spare, it's best to have it duplicated, and keep it in a safe spot.

Another reason is that the ignition cylinder itself may wear out. If the lock pins within get stuck or snagged together it can stop keys from moving all the way into or out of the cylinder. This can be resolved by replacing the cylinder, however, it is recommended to replace the cylinder before the key gets stuck in the ignition.

If the keys of your Ignis remain stuck even after trying the simplest solutions, it might be the time to oil the cylinder. Graphite powder or liquid graphite could aid in moving the lock pins more freely and unbind your key. It is available at most auto parts stores. When applying the lubricant make sure your Ignis is in park. Do not try to pull it out of its bind it. This could cause more serious problems.

Broken

If you have tried all the easy methods to make a key unstick and it still won't budge, the last resort is to apply oil to move it. You where can i get a suzuki key made; Additional Info, purchase this from your local auto parts store and apply it to the inside of the cylinder for the ignition lock with a cotton ball or rag. Move the key gently to spread the lubricant and then try again. If you're able to massage it forward, go ahead but be careful not to push too hard or you could break it off in the cylinder.

It is also possible that the internal circuitry of the key will begin to fail over time. This isn't as frequent and typically means that you'll need to get the key duplicated in order to get a new one.

The case of your suzuki swift smart key programming keyfob may also be damaged or worn. This is especially true in the case of an imitation key fob with a plastic or rubber shell. The Key Crew may be capable of transferring the internal circuitry from the old keyfob to an appropriate replacement case based on the circumstance. This can save you the expense of purchasing an entirely new keyfob. We'll inform you what options are available for your situation when we call you to schedule the service.