• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the Saab 9-3

saab key replacement owners must follow a set of specific steps to add a second ignition key. This requires a handheld computer, called Tech-2 that is operated by the dealer. Then a new key and transponder have to be purchased and then programmed to the car.

Rotate your keys to prevent one from deteriorating faster than the next. This will keep your keys in top condition.

Replacement Case

Contrary to the classic Saab keys of the past, the new key fobs are equipped with electronics which makes it more difficult to create a duplicate. This has made stealing cars much more difficult than twenty years ago. However, it has made the replacement of lost keys a comparatively expensive task.

Every owner of a 9-3 Saab should have at least two functioning keys. If one is lost it costs a fortune to replace it in the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100 and $200 to do this.

There are ways to avoid the high cost. Some parts providers will use the code of an old key to cut a brand new metal blade for less than the cost of the dealer. The key must, however, be the same as the original one to function properly in your car.

You can also replace the case yourself by following these steps. You will need to have a flathead and patience. With the screwdriver, pry away the plastic and take out the emergency key. Once you have the case opened, take out the electronics and put them in your new case. Make sure you insert the correct key and badge into the case.

Replacement Battery

The replacement battery for the saab 9-3 key 9-3 is a low-cost part that can be replaced quickly and easily. This YouTube video by Cyclone Cyd demonstrates how you can replace the remote fob battery with just four easy steps. This tutorial will work with any modern Saab key fob. However, the procedure might differ slightly.

This button is usually placed next to the saab key programmer logo on the back of the fob. It is usually located close to the Saab logo on the back of the fob. Then you will need a flathead screwdriver to insert into the small hole inside this button. This should be enough to open the fob case to allow you to change the battery.

After the new battery CR1632 is in place it is possible to reassemble the remote key fob and then program it to your car. The entire process should take no more than a half hour at the most. This is a straightforward process that doesn't require any special tools.

If you lose your key, the process is somewhat more complex however it can be accomplished. The dealer will have to determine the VIN of the car and then order a new key blade and TWICE module with the proper unique code. After that, they'll have to cut the new key and then program it with a brand new tool for programming called MDI.

Replacement Key Fob

The key fob contains batteries that are used to lock and unlock your vehicle. The batteries have a lifespan and eventually expire. This is a frequent issue in all vehicles. The good thing is that you can replace the battery in most key fobs without having to replace the entire case. You can purchase fobs replacements on Amazon that have all the electronics already installed, which means you can simply open the case and replace the old batteries. It is important to keep in mind that you will need to remove the emergency key first, and you can accomplish this by inserting the small screwdriver flathead into the slot located in the middle of the case. The case will split once you rotate the screwdriver around it.

When you are ready to replace your keys, ensure that you have spare keys, as this will reduce the total cost by a substantial amount. If you have a spare, you can have the dealer cut an entirely new key and then program it to the car, which is much cheaper than replacing the whole key fob.

It is possible to add a second key to your vehicle If you don't already have one, however it requires lots of research and effort. The cost of adding a second key is around a hundred dollars and also requires programming of the car's computer. This can be done by a professional, however it's an expensive option for most owners.

Replacement Ignition

Unlike earlier Saab vehicles, the latest SAAB 9-3 models use an extremely sophisticated alarm system that is dependent on a coded keys. This means that if you lose your only working key, acquiring another one can be very expensive as the car has to have a computer module installed, and it must also be specifically designed to accept a different key. The majority of locksmiths aren't able to do this and even dealers can charge several hundreds of dollars just to program the new key!

If you've lost the only working key the dealer will replace the computer in your car (known as the CIM or saab 9-3 Key TWICE) to create a replacement, and they will charge you a premium price for it. Instead we can reprogramme the EEPROM on your existing car computer to make it ready to accept a second key, and save you over 50% of the amount you be charged at a dealership.

If you've been a long-time owner of a 03-11 SAAB 9-3, then you likely have noticed that the ignition switch isn't very durable. If the ignition key you have isn't working correctly, you should look into replacing it. They can become extremely sticky and the buttons have been known to fall off. Fortunately, replacing the ignition key isn't as difficult as it sounds and is fairly easy to do using the right tools.