• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of special steps to install a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 that is operated by the dealer. Then a new car key and transponder must be purchased and then programmed to the car.

Rotate your keys to stop one from wearing out more than the other. This will also keep your keys in top shape.

Replacement Case

The new key fobs are not like the old saab key programming keys. They have electronics that make them difficult to duplicate. This has made theft of cars much more difficult than it was twenty years ago. It has also made it more expensive to replace lost keys.

saab 9-3 key fob programming 9-3 owners must have two keys that work. If one is Lost key replacement it is expensive to replace it in the car, as it requires replacing the CIM module and reprogramming the locking cylinders. Dealers will typically charge $100-$200 to do this.

There are ways to reduce these high cost. Some parts suppliers will use the code of an old key to cut a new metal blade for a fraction of that of a dealer. The key, however, must be identical to the original to work correctly within your car.

You can also change the case yourself by following these steps. You'll need a flathead screwdriver and some patience. With the screwdriver, slowly tear the plastic away and separate the emergency key from the case. When the case is opened, remove all electronics and place them in your new case. Make sure you insert the correct badge and key back into the case as well.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable component that can be replaced easily and quickly. Cyclone's YouTube video Cyd demonstrates how you can replace the remote fob battery with only four steps. This tutorial can be used for any modern-day saab key fob however the procedure might differ slightly.

The button is normally located next to the Saab logo on the back of the fob. The button is usually found on the back of the fob just below the Saab Logo. Use a flathead to insert the screwdriver through the small hole in this button. This will allow you to open the case of the fob to allow you to replace the battery.

Once you have installed the batteries CR1632, you can put back together the remote key fob. Then, you can program it into your car. The entire process should take no more than a half hour at the most. It's a simple procedure that doesn't require any special tools.

If you lose your key, the procedure will be more complicated however it can be accomplished. The dealer has to first verify the VIN of the vehicle and then order an additional TWICE module and key blade with the proper unique code. The dealer will then need to program the key using MDI, a new software tool.

Key Replacement Fob

The key fob is the device that locks and unlocks your car. It has a battery within. Batteries have a finite lifespan and eventually will die. It is a common problem for all vehicles. The good thing is that you can replace the battery on most key fobs, without having to replace the entire case. You can buy replacement fobs from Amazon that have all the electronics already installed, so you'll be able to simply open the case and replace the old batteries. You'll need to take out the emergency key before you replace the batteries. To do this, insert the screwdriver of a small flat head into the slot that is in the middle of the. The screwdriver should be moved around the case, and it will split open, making it simple to take it out.

If you are about to replace the keys, ensure that you have a spare since this will cut down the total cost by a substantial amount. If you have spare keys, you can have the dealer cut an entirely new key and then program it to the car, which is much cheaper than replacing the whole key fob.

It is possible to add a second key to your car even if you don't have one, however it requires lots of research and work. It can cost a few hundred bucks to add an additional car key. The computer of the vehicle must also be programmed. This can be done by a professional, however it's an expensive option for the majority of owners.

Replacement Ignition

The latest SAAB 9-3 uses an alarm system that is more sophisticated based on a key code. This means that if you lose your only working key, adding another one could be very expensive as the car has to have a unique computer module fitted and must also be programmed to accept a new key. Locksmiths typically aren't able to program this and a dealer will charge several hundreds of dollars just to program the new key!

Dealers will charge you the highest price to replace your car's computer (also called the CIM or SAAB twice) in the event that you lose your only functioning key. Instead we can reprogramme the EEPROM of your current car computer to allow it to be programmed for an additional key, slashing over 50% of the price you spend at a dealer.

If you've been a long time owner of an 03-11 saab 93 key fob 9-3, you probably are aware that the ignition key isn't very durable. They can get extremely sticky, and the buttons are known to fall off of them every now and then, so you should consider replacing your ignition key if it isn't working as it should. It's not as difficult as it seems to replace the ignition key. With the proper tools, it can be accomplished quickly.