• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They do not rot or rust like aluminum and timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. If you have double glazed window repairs near me-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need source some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass so that any shards will fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional comes out and fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap between the window and the door is large, you might prefer an alarm system that has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a variety of issues that include sagging. A sagging uPVC window repairs can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll have to open the window to get to the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for an appropriate fit. If you are happy with the fit of the window, you can tighten screws to keep them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it could also be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to shut the window and do an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if awake each day to find mouldy walls and floors that are wet. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking may require removal before a new layer can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double glazed window repairs near me-glazed window, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens with a breeze. They can be repaired by any skilled DIYer and can usually be done within a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they can wear down over time. Changing a window hinge is essentially a very simple process but it can be simpler with someone else to help hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrows on each hinge. This indicates the direction in which the window should open.

The issue can be caused either by opening the window incorrectly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be more than happy to give you advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It can also reduce the chance of windows getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also because of wear and tear, could become misaligned. This will cause an opening to appear between the sash and the frame. They can be fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can also be misaligned, and again it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to recognise that all windows have a lifespan and there may come the point when it's more cost-effective to replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it's recommended to seek help from a professional immediately.