• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum and timber.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. However, if you have double glazed window repairs near me pane windows that are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this case you'll need to source some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you plan attempt to remove the glass panes yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass so that any shards will fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap between the window repairs near me and the door is large, you might want to use security screens that includes a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of problems including sliding. A sagging window can cause problems with light, draughts or even security. It's crucial to act immediately if you notice your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to access the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you're satisfied with the fit, you can tighten the screws to ensure they remain in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.

UPVC handles can also loosen up. The majority of the time, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The corners of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's important to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on how serious the issue is, old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it blows open with an ease. They can be easily replaced by any competent DIYer and can be completed in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.

It is also important to verify that the upvc window repairs hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. Sending us a picture via our website will often solve the issue. We are always happy to provide suggestions.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges may also become disaligned as a result of wear, which can cause gaps where the sash meets frame. They can be fixed by giving them a good clean, but in the event that they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window, may be misaligned. Again, it may be feasible to give them a clean but in some instances it could be necessary to have these replaced.

The next common cause of draughts is the window seals, these can become worn down or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and lessen draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it is more cost-effective to simply replace them than to repair them. So, if you're experiencing issues with your upvc window repairs windows, it's recommended to seek help from a professional as soon as you can.